Ex-Factory Attachment; Waste Container Attachment; Removing The Waste Container - Kärcher MC 250 Implements Manual

Contents
1 Ex-factory attachment .................................................
1.1 Waste container attachment .......................................
1.1.1 Removing the waste container.................................
1.1.2 Attaching the waste container..................................
1.1.3 Emptying the waste container..................................
1.2 Opening/closing the lock.............................................
1.3 2-brush sweeping system attachment (ex works).......
1.3.1 Requirements for removal/installation......................
1.3.2 View of the device for a 2-brush sweeping system..
1.3.3 Removing the 2-brush sweeping system .................
1.3.4 Attaching the 2-brush sweeping system ..................
1.3.5 Control assignments for a vacuum sweeper with a 2-
brush sweeping system........................................
1.3.6 2-brush system care work........................................
1.3.7 Adjusting the sweeping area....................................
1.3.8 Storage ....................................................................
1.4 3-brush sweeping system attachment (ex works).......
1.4.1 Requirements for removal/installation......................
1.4.2 3-brush sweeping system device view.....................
1.4.3 Removing the 3-brush sweeping system .................
1.4.4 Attaching the 3-brush sweeping system attachment
1.4.5 Control assignments for a vacuum sweeper with a 3-
brush sweeping system........................................
1.4.6 Using the weed brush ..............................................
1.4.7 Transport lock ..........................................................
1.4.8 Care work ................................................................
1.4.9 Adjusting the sweeping area....................................
1.4.10 Storage ..................................................................
1.5 Sweeping mode ..........................................................
1.5.1 Symbols on the display during sweeping.................
1.5.2 Fill the fresh water tank / recycling water tank .........
1.5.3 Working with spray water.........................................
1.5.4 Water circulation system / recycling mode...............
1.5.5 Sweeping .................................................................
1.5.6 Brush contact pressure pedal ..................................
1.5.7 Checking the filling level of the waste container ......
1.6 Care and service.........................................................
1.6.1 Cleaning the suction mouth and suction system......
1.6.2 Cleaning the recycling system .................................
1.6.3 Draining waste water / recycling water ....................
1.6.4 Cleaning the waste container...................................
1.6.5 Cleaning the vehicle ................................................
1.7 High-pressure cleaner attachment (ex-factory)...........
1.7.1 Symbols on the display during sweeping.................
1.7.2 Intended use ............................................................
1.7.3 Safety information ....................................................
1.7.4 Operation .................................................................
1.7.5 Care and service......................................................
1.7.6 Troubleshooting guide .............................................
1.7.7 Technical data ..........................................................
1.7.8 Installation declaration .............................................
1.8 Manual suction hose attachment (ex-factory) .............
1.8.1 Working with the manual suction hose ....................
1

Ex-factory attachment

1.1

Waste container attachment

The waste container attachment can only be used in con-
junction with a Kärcher brush sweeping system or scrub-
bing system. These attachments are described after the
chapter.

1.1.1 Removing the waste container

DANGER
Risk of injury from the waste container
Keep a sufficient distance from the waste container and
the supports when removing/installing.
Maintain a sufficient clearance to the hazard zone and stop
raising/lowering of the waste container immediately when
21
a person enters the hazard zone.
21
Secure the raised waste container with the safety brackets
21
when you work underneath.
23
Only remove the waste container when it is completely
23
24
empty.
24
ATTENTION
24
Risk of injury and damage
25
Set the waste container down only on a level and smooth
25
surface.
25
1. Empty the waste container before removing the waste
container. See chapter "Emptying the waste container".
26
27
27
28
28
28
28
28
29
30
30
30
30
31
31
31
Illustration: Waste container secured
31
31
Waste container
1
32
Safety bracket
2
32
Sealing collar
3
32
2. Raise the waste container until the safety brackets can
32
be folded forward. See chapter "Emptying the waste
33
container".
33
3. Lower the waste container onto the safety brackets.
33
33
34
34
34
34
35
35
35
35
35
36
36
36
37
37
Sealing collar
1
Hose clamp
2
4. Remove the sealing collar by opening the hose clip (SW
7) and pulling off the sealing collar.
English 21