Daewoo D1146 Maintenance Manual page 91

valve guide.
After installing valve springs and spring
retainer, press the retainer with a jig, then
install the cotter pin.
Tap the valve stem lightly with a rubber
hammer to check that the valve is
assembled correctly.
3.3.27. Cylinder head
Blow the bolt holes of cylinder block with
a compressed air and remove the
foreign matter.
Clean the head gasket contact
surface
thoroughly.
CAUTION :
However, be careful for the foreign
material not to enter into the
combustion chamber.
Assemble the new head gasket by
aligning the holes with dowel pins of
cylinder block with "TOP" mark facing
upward.
G1102
Compress the spring
TOP
G1103
87
D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
Printed in Jan. 2001 PS-MMA0415-E1A