Reassembly - Daewoo D1146 Maintenance Manual

3.3. Reassembly

3.3.1. General precautions
Clean all the disassembled parts, particularly oil and water ports, using
compressed air, then check that they are free from restrictions.
Arrange the general and special tools in order for engine assembly operation.
To wet each sliding part, prepare the clean engine oil.
Prepare service materials such as sealant, gaskets, etc.
Discard used gaskets, seal rings, and consumable parts, and replace with new
ones.
Apply only the specified torque for bolts in the specified tightening order and
avoid over-tightening.
Be sure to check that all the engine parts operate smoothly after being
reassembled.
Check the bolts for looseness after reassembly.
After completing the engine reassembly operation, check if there is missing parts
or shortage of parts.
Keep your hands clean during the working.
3.3.2. Cylinder block
Cover the floor of the workshop with wood
plate or thick paper to prevent damage to
the cylinder head and place the cylinder
block with the head fitting surface facing
downward.
3.3.3. Oil spray nozzle (D1146TI, DE08TIS)
Tighten and assemble the oil spray nozzle
flange with fixing bolts using the spray
nozzle jig.
Torque 7 kg.m
69
D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
Printed in Jan. 2001 PS-MMA0415-E1A