Daewoo D1146 Maintenance Manual page 46

3.1.30. Oil pump
Unscrew the bracket fixing bolts of the oil
suction pipe.
Unscrew the pipe fixing bolts of oil pump
and disassemble the suction and supply
oil pipe.
Unscrew the oil pump fixing bolts, and
disassemble the oil pump.
3.1.31. Piston and connecting rod
Remove the connecting rod cap bolts in
the reverse order of assembling but do
same as the cylinder head bolt removal.
Disassemble
connecting rod caps by tapping lightly
with urethane hammer, and remove the
bearing.
By pushing the connecting rod with
wooden bar from the direction of oil pan
toward cylinder head, disassemble the
piston assembly.
The disassembled
should be handled to prevent bumping
each other, and stored as the cylinder's
order.
In order for connecting rod cap not to be
swapped, temporarily assemble to the
corresponding connecting rod.
<Disassembly of piston>
(1) Remove the snap rings by means
of a plier.
the upper/lower
piston assembly
42
of
Printed in Jan. 2001 PS-MMA0415-E1A
D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL