Daewoo D1146 Maintenance Manual page 72

3) Wear
Assemble the connecting rod to the
crankshaft and measure connecting
rod big end side clearance using a
feeler gauge.
Assemble the connecting rod to the
piston and measure connecting rod
small end side clearance.
If the measured values are beyond
the limit, replace the connecting rod.
3.2.7. Fuel injection nozzle projection (DE08TIS)
Insert a seal ring on the cylinder head
and assemble the injection nozzle
Measure the clearance between the
cylinder head bottom and nozzle tip. If
the measured values are beyond the
limit, replace the seal ring.
(Thickness of seal ring)
(Projection of nozzle)
Limit 0.5 mm
Standard
A
B 2.43~2.80
Torque
7kg.m
3.5±0.1
mm
mm
68
D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
Fuel injection nozzle
Cylinder head
A
B
Printed in Jan. 2001 PS-MMA0415-E1A