Daewoo D1146 Maintenance Manual page 50

3.1.41. Crankshaft
Assemble the bolts on the both side of
crankshaft temporarily.
Connect the rope to the bolts and lift the
crankshaft by means of crane being
careful not to give any damage on it.
In order for the disassembled crankshaft
to be prevented from bends or damage,
put it on the special lathe and store.
Disassemble the metal bearings in turn
and store them.
NOTES :
Do not mingle with the metal bearings
and bearing caps randomly. To prevent
mixing, temporarily assemble the metal
bearings to the corresponding bearing
caps in turn.
3.1.42. Camshaft and tappet
In order for camshaft not to be damaged,
disassemble turning it.
In order for the disassembled camshaft to
be prevented from bends or damage, put
it on the special lathe and store.
Pull out the tappet.
As required, pull out the camshaft bush
from the cylinder block by a press.
Check for damage, scratch, wearing state
and if abnormal, tear down.
46
D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
Printed in Jan. 2001 PS-MMA0415-E1A