Daewoo D1146 Maintenance Manual page 109

(3) Measuring clearance between drive shaft and
bushing
a. Measure the outside diameters of the drive
shaft and driven shaft, and replace if the
measured values are less than the limit
(φ16.95mm)
Standard
b. Measure the inside diameter of the pump
body bushing to determine the clearance
between the bushing and shaft, and
compare the measured value with the
standard value to determine whether to
replace or not.
Clearance
Reassembly
(1) For reassembly, reverse the disassembly sequence.
φ16.95 ∼ φ16.968 mm
0.032 ～ 0.077 mm
104
D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
Printed in Jan. 2001 PS-MMA0415-E1A