Daewoo D1146 Maintenance Manual page 22

3) Rotating the crankshaft by one revolution, #6
cylinder become the compression state of top
dead center.
4) Thereafter
corresponding to "
5) After reinsuring
retighten if necessary.
No. 1 cylinder is located at the side where
flywheel was installed.
Flywheel
2.1.9. Cylinder compression pressure
Stop the engine after warming up,
and
take out nozzle holder assembly.
adjust the valve
of lower figure.
"
the valve
Intake Valve
clearances
clearances,
Exhaust Valve Cylinder No.
G1067
18
D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
Cooling Fan
G1048
Printed in Jan. 2001 PS-MMA0415-E1A