Daewoo D1146 Maintenance Manual page 65

(2) Crankshaft bearing and connecting rod
1) Visual check
Visually check the crankshaft bearing
and connecting rod bearing for scores,
uneven wear or damage.
2) Oil clearance between crankshaft and bearing (Method 1 : dial gauge)
Main bearing clearance
Install the main bearing in the
cylinder block, tighten the bearing
cap to specified
measure the inside diameter.
Torque
Compare the two values obtained
through measurement
bearing inside diameter with the
outside diameters
journals to
clearance.
<Main bearing oil clearance>
Standard
0.052 ∼ 0.122 mm
Connecting rod bearing clearance
Install the connecting rod bearing in
the connecting rod bearing cap,
tighten the connecting rod cap bolts
to the specified
measure the inside diameter.
Torque
torque, then
30 kg.m
of main
of crankshaft
determine the oil
Limit
0.25 mm
torque, then
18 kg.m
61
D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
M1116
Printed in Jan. 2001 PS-MMA0415-E1A