Daewoo D1146 Maintenance Manual page 98

to the
impressed on the fuel filter head so
that fuel can be fed in the sequence of
FUEL FEED PUMP → FUEL FILTER
→ FUEL INJECTION PUMP.
3.3.37. Injection nozzle
Install a new seal ring in the nozzle hole
of the cylinder head.
As aligning the ball of nozzle with
a
groove in the nozzle hole, Insert the
nozzle into the cylinder head and tighten
the nozzle.
Torque
3.3.38. Fuel injection pipe
Semi-assemble a nut at both ends of the
fuel injection pipe and tighten them up
one by one to specified torque.
Torque
Assemble the fuel return pipe on the
nozzle holder.
Connect the injection pump lubricating
oil pipe with a hollow screw.
CAUTION :
Be sure not to damage the connection
part due to over-tightening the hollow
direction of an arrow
7.0 kg.m
3.0 kg.m
G1104
94
D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
Printed in Jan. 2001 PS-MMA0415-E1A