Daewoo D1146 Maintenance Manual page 44

CAUTION :
When reassembling the bush, cool the
bush in dry ice and press the bush
while aligning the bush with the oil
hole of the rocker arm.
3.1.26. Cylinder head
Remove the cylinder head bolts in the
reverse order of tightening but remove it
step by step.
First step : Loosen 1 ～2 threads
Second step : Remove by loosening fully.
However,
simultaneously by the step of 1 and 2.
Lay the removed bolts orderly not to
damage the threads at all and store.
CAUTION :
Prevent a collision between the bolt
thread each other.
Take out the cylinder head gasket and
scrap it.
Remove the foreign residues from the
cylinder head surface and block surface.
CAUTION :
Try not to make any damage on the
contact surfaces.
Disassembly of cylinder head
- Place the cylinder head on a individual
shelf.
- As pressing the valve spring with a
special tool, remove the cotter pin,
valve spring.
- Take out the intake and exhaust valves.
remove the total bolts
G1089
G1102
Compress the spring
40
D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
Printed in Jan. 2001 PS-MMA0415-E1A