Torque
Apply engine oil to the oil filter cartridge
o-ring and assemble the cartridge using a
filter wrench.
3.3.24. Oil cooler
Install the gasket on the cylinder block.
Assemble the oil cooler by tightening the
assembling bolts.
Connect the cooling water pipe with the
cooling water pump and tighten a hose
clamp.
3.3.25. Starter
Assemble the starter in position on the
flywheel housing.
Torque
3.3.26. Intake and exhaust valves
Identify the marks of "IN" and "EX"
impressed on the valve head before
assembling the valve with the valve head.
With a valve stem seal fitting jig,
assemble the valve stem seal on the
2.2 kg.m
8.0 kg.m
86
G1101
D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
Printed in Jan. 2001 PS-MMA0415-E1A