Table of Contents
Advertisement
1. In the left navigation bar, click
2. For the interface that you want to modify, select values using the information in the table below.
3. To enable a configuration, click the
4. To disable a configuration, clear the
5. Click
Apply/Save
The fields on this page are defined below.
Field Name
Description
Interface
Displays a list of available WAN interfaces.
Version
Select the applicable version of the Routing Interface Protocol. For detailed information about versions, refer to
RFC 1058 and RFC 1453. Options are 1, 2, and Both.
Operation
This option is set to Passive and cannot be changed. This mode listens only. It does not advertise routes.
DNS
In this section, you can configure a DNS server, dynamic DNS and static DNS.
DNS Server
On this page, you can select a DNS server interface from the available interfaces, manually enter the DNS server addresses, or
obtain the DNS address from a WAN interface.
SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
Advanced Setup
Enabled
checkbox next to the interface.
Enabled
checkbox.
to commit your changes.
>
Routing
> RIP. The following page appears.
83
- Quick Links:
- Logging in to Your Gateway's Ui
Hide quick links:
Advertisement
Table of Contents
