Quality Of Service; Qos Queue - ADTRAN SmartRG SR555ac User Manual

Quality of Service

On this page, you can enable or disable QoS and set the DSCP Mark
The maximum number of queues that can be configured vary by mode, as shown below.
Mode Maximum # of queues
ATM 16
Ethernet & 8 per interface
Ethernet WAN
PTM 8
Note: Queues for wireless connections (e.g., WMM Voice Priority) are shown only when wireless is enabled. If the
option on the Wireless > Basic Setup page is disabled, assigning classifications to wireless traffic has no effect.
1. In the left navigation bar, click
Service feature is enabled by default.
2. To disable QoS for ALL interfaces, click the
3. (Optional) Select the default DSCP Mark (Differentiated Services Code Point) classification value to be used. The
default is No Change(-1).
4. Click Apply/Save

QoS Queue

On this page, you can configure a queue and add it to a selected Layer2 interface. You can also edit and delete queues. A number of
standard queues are already defined. You may have to remove queues that you don't need in order to create the desired queues.
SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
Advanced Setup
Enable QoS
to save your settings.
classification.
> Quality Of Service. The following page appears. The Quality of
check box to clear it.
WMM Advertise
72