Security - ADTRAN SmartRG SR555ac User Manual

3. Modify the settings as desired, using the information provided in the table below.
4. (Optional) Define up to three virtual access points for guest access using the information from the
Guest/Virtual Access Points
5. Click Apply/Save
The fields on this page are defined below.
Field Name Description
Enable Wireless This option is selected by default. To disable the wireless feature, clear the checkbox. All other fields on
the page are hidden.
Enable WiFi Button This option is selected by default. To disable the gateway's 2.4GHz button, clear the checkbox.
Hide Access Point Click to hide the access point SSID from end users and passive scanning.
Clients Isolation Click to prevent LAN client devices from communicating with one another on the wireless network.
Disable WMM Advertise Click to stop the wireless from advertising Wireless Multimedia (WMM) functionality. Selecting this option
can improve transmission performance for voice and video data.
Enable Wireless This option is selected by default allowing multicast traffic to be forwarded across wireless clients. This
Multicast Forwarding option can improve the quality of video services such as IPTV. To disable Wireless Multicast Forwarding
(WMF), clear the checkbox.
SSID (Optional) Enter the WiFi SSID. For security purposes, this identifier should be unique for your system.
BSSID Displays the Basic Service Set Identifier (BSSID), the MAC address assigned to the wireless router.
Country Select the country where this gateway will operate.The wireless channel adjusts to the frequency
provision for the selected country.
Country RegRev Enter the revision number of the country region document for this gateway.
Max Clients Enter the maximum number of clients that can access the route wirelessly. Options are 1 through the
value set in the
Note: Before you can change this setting, you must change the
Wireless - Guest/Virtual Access Points
Enabled Click to enable a virtual wireless access point for guest access.
SSID Enter the wireless SSID for guests to use.
Hidden Click to hide the SSID from being broadcast publicly.
Isolate Clients Click to prevent client PCs from communicating with one another.
Disable WMM Advertise Click to enable the wireless from advertising Wireless Multimedia (WMM) functionality.
Enable WMF Click to disable Wireless Multicast Forwarding (WMF).
Max Clients Enter the maximum number of clients that can connect to this access point.
BSSID Displays the Basic Service Set Identifier or N/A.

Security

On this page, you can configure network security settings of a wireless LAN interface, either by using the WiFi Protected Setup (WPS)
method or by setting the network authentication mode. For WiFi Protected Setup, the following methods are supported:
SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
section of the table below.
to commit your settings.
Global Max Clients
section
field on the Wireless > Advanced page.
Global Max Clients
Wireless -
setting.
107