Table of Contents
Advertisement
3. To edit an existing route:
a. Click the
Edit
b. Modify the fields as needed and then click APPLY.
4. To delete a route, click the
5. When finished, click
APPLY
The following table describes the fields on this page.
Field Name Description
Interfaces
Select the interface for the static route.
Target
Enter the host IP or network address. You can enter specific IP addresses or identify an entire subnet. For example,
you might enter 192.168.1.0 to identify a subnet.
Netmask
(Appears for IPv4 routes only) Enter the net mask for the target IP address.
Gateway
Enter the gateway address for the route.
Metric
Enter the number of hops needed to reach the default gateway. The default is 0.
DNS
On this page, you can configure DNS servers.
1. In the left menu, click
2. To add a custom DNS server, in the
a. Click the
plus sign
b. Enter the IP address of the custom DNS server and click SAVE. If you do not enter an IP address, an error appears
SmartRG Inc., an ADTRAN Compny Proprietary and Confidential. All Right Reserved. © 2019
icon (
) next to it. The Add Static Route dialog box appears.
Trashcan
icon next to it.
to save your changes.
Network
>
Routing
> DNS. The following page appears. This feature is enabled by default.
Custom DNS Servers
(+) below the
Actions
label. The Add/Edit DNS Server dialog box appears.
section:
42
Hide quick links:
Advertisement
Table of Contents
