ADTRAN SmartRG SR555ac User Manual page 127

b. Modify the fields, using the information provided in the
4. Click Apply/Save
5. To run a loopback test, enter a MAC address in the
page. The results appear in the
6. To run a linktrace test, enter a MAC address in the
page. The results appear in the
The fields on this page are defined below.
Field Name Description
Ethernet Link OAM (802.3ah)
WAN Interface Select the WAN interface that you want to test.
OAM ID Enter the ID of this OAM configuration. Only positive numbers are allowed.
Auto Event Click to enable automatic reporting of events.
Variable Retrieval Click to enable on-demand link diagnostics, including bit-error-rate approximation.
Link Events Click to enable reporting of critical conditions that may cause link failure.
SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
section of the table below.
to commit your changes.
Loopback Result
Linktrace Resultt row of the table.
section
Ethernet Service OAM (802.1ag/Y.1731)
Target MAC field and click Send Loopback
row of the table.
Target MAC field and click Send Linktrace
at the bottom of the
at the bottom of the
127