Advanced - ADTRAN SmartRG SR555ac User Manual

1. In the left navigation menu, click
2. Modify the fields as needed, using the information provided in the table below.
Field Name
AP Mode
Bridge Restrict
Remote Bridges
MAC Address
3. Click Apply/Save

Advanced

On this page, you can configure the advanced features of the wireless LAN interface. You can select a particular channel on which to
operate, force the transmission rate to a desired speed, set the fragmentation threshold, the RTS threshold, the wakeup interval
for clients in power-save mode, and more.
SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
Wireless > Wireless
Description
Select whether to use this gateway as an access point or a wireless bridge. The default is Access
Point.
Enable or disable the bridge restrict function for MAC addresses in the
Address field. Options are:
Enabled: Allow only those bridges selected in the
l
table to access the wireless LAN. This is the default.
Enabled (Scan): Allow only those bridges selected in the
l
Address table to access the wireless LAN but the scanning feature is active.
Disabled: Disable the wireless MAC address filtering function. Any wireless bridge
l
can access the wireless LAN.
Enter up to four MAC addresses for the remote bridges that are allowed to access the wireless
LAN.
to save your settings.
Bridge. The following page appears.
Remote Bridges MAC
Remote Bridges MAC Address
Remote Bridges MAC
115