ADTRAN SmartRG SR555ac User Manual page 56

2. (Optional) In the
defined, the only option is Default.
3. Modify the other fields using the information in the following table. The default configuration settings work for most
scenarios.
Field
IP Address /
Subnet Mask
Enable IGMP Snooping
Enable LGMP LAN to LAN Multicast
Enable LAN side firewall
Disable DHCP Server /
Enable DHCP Server
Static DNS Servers
4. To add addresses to the
a. Click
b. Enter the MAC address of the LAN host.
c. Enter the static IP address that is reserved for the host.
d. Click
5. To remove entries from the
Remove Entries.
SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
GroupName field, select the interface group for this configuration. If there are no groupings
Description
Modify the IP address and subnet mask of the device. The default IP address
is that of the gateway and the subnet mask is 255.255.255.0.
This option is enabled by default. Options are Standard Mode and Blocking
Mode. The default is Blocking Mode.
To disable this option, clear the check box.
This option is disabled by default. To enable this option, select Enable.
Click to enable the LAN-side firewall.
This option is enabled by default. You can modify the address, server and
leased time fields as needed.
To disable the DHCP server, click
enter different server information for the LAN.
(Optional) Enter the IP addresses for the
servers.
Static IP Lease List:
Add Entries below the MAC Address
Apply/Save to apply the settings. You are returned to the LAN Setup page.
Static IP Lease List, click the
Disable DHCP
Primary
field. The DHCP Static IP Lease page appears.
Remove check box next to the entry and then click
Server. Then, if needed,
and Secondary DNS
56