PPP over Ethernet WAN Service
There are several parts to configuring a PPP over Ethernet (PPPoE) WAN service. You will progress through several pages to
complete the configuration.
Note: You can configure 7 services. If 7 services are configured, you must remove 1 of the services before configuring a new one.
1. In the left navigation bar, click
2. Select the Layer 2 interface to use for the WAN service.
SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
Advanced Setup
>
WAN Service
and then click Add. The following page appears.
31