ADTRAN SmartRG SR555ac User Manual page 97

Field Name
Tunnel Mode
WAN Interface
Remote Security Gateway
Anonymous
LAN-side VPN
IP Address
Mask or Prefix Length
Local ID Type
Remote-side VPN
IP Address
Mask or Prefix Length
Remote ID Type
SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
Description
Select the encapsulation method to be used. Options are:
ESP: Use this mode to encapsulate a packet with ESP and IP
l
headers. An ESP trailer is added to the packet for authentication
and integrity. This is the default.
AH: Use this mode to encapsulate a packet with AH and IP
l
headers. For authentication, the entire packet is signed.
Select the interface for the WAN service.
Enter the WAN IP address for the tunnel.
Click to enable anonymity protection on this connection.
Select whether to allow access to the entire LAN or a single host for local IP
addresses. Options are:
Subnet: Allows access to the entire LAN. Enter the IP address and
l
mask or prefix length for the VPN. You can also select the local
ID type. This is the default.
Single Address: Allows access to a single host. Enter the IP
l
address for the host.
Enter the IP address for local access.
Enter the subnet mask or prefix length for IP address entered for local access,
e.g., 255.255.255.0.
Select the type of ID for the local VPN. Options are Default, Domain, and E-Mail.
The default is Default. When you select Domain or E-Mail, the
becomes available. Enter the ID.
Select whether to allow access to the entire LAN or a single host for remote IP
addresses. Options are:
Subnet: Allows access to the entire LAN. Enter the IP address and
l
mask or prefix length for the VPN. You can also select the remote
ID type. This is the default.
Single Address: Allows access to a single host. Enter the IP
l
address for the host.
Enter the IP address for remote access.
Enter the subnet mask or prefix length for IP address entered for remote access,
e.g., 255.255.255.0.
Select the type of ID for the remote VPN. Options are Default, Domain, and E-
Mail. The default is Default. When you select Domain or E-Mail, the
field becomes available. Enter the ID.
ID Content field
ID Content
97