3. To modify additional parameters, click
4. Select the test mode that you want to run.
5. To view the tone selection table, click
Close the window to return to the DSL Advanced Settings page.
6. Click
Apply
and then click
7. Click
Apply/Save
DSL Bonding
Bonding enables two DSL lines to feed the same modem and leveraging the bandwidth of both lines. Once bonded, the lines behave
as a single, higher bandwidth connection.
On this page, you can enable xDSL bonding.
Note: Any changes you save on this page will reboot the gateway.
SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
Advanced
Tone
Selection. Changing these settings arbitrarily is not recommended.
DSL
in the left menu to return to the DSL page.
to save your changes.
Settings. The following page appears.
88