ADTRAN SmartRG SR555ac User Manual page 75

Field Name Description
Minimum Rate Enter the minimum shaping rate defined for packets in QoS queues. Options are 1 - 100000 Kbps. The default
is -1 (no minimum shaping rate).
PTM Priority Select the priority for this queue. Options are Low and High. The default is Low.
Queue Weight Enter the weighting value to associate with this queue. Options are 1 - 63. The default is 1.
Note: The higher the weighting value, the more frames that are sent proportionately given the WRR
algorithm employed. Traffic is given priority based on the combined values from this field and the
Precedence
Scheduler Algorithm Select an algorithm for data priority in queues. Options are:
Shaping Burst Size Enter the shaping burst size to be applied to packets in the defined queue. Options are 1600 bytes or
greater.
Shaping Rate Enter the shaping rate for packets in QoS queues. Options are 1 - 100000 Kbps. The default is -1 (no minimum
shaping).
WLAN Queue
On this page, you can view the WLAN queues defined for your network.
Note: Make sure that wireless connection is active by going to
In the left navigation bar, click
appears.
SmartRG Inc., an ADTRAN Company Proprietary and Confidential. All Right Reserved. © 2020
field.
Strict Priority: Allows shaping of rate and burst size for packets in queue.
l
Weighted Round Robin: Applies a fair round robin scheme weighting that is effective for
l
networks with fixed packet sizes, e.g., ATM networks.
Weighted Fair Queuing: Applies a fair queuing weighting scheme via allowing different
l
sessions to have different service shares for improved data packets flow in networks with
variable packet size, e.g., PTM/IP networks.
Advanced Setup > Quality Of Service
Wireless and clicking Apply/Save.
> QoS Queue Config > Wlan Queue. The following page
75