Selection Example Of Wires; Selection Example Of Wires For Converter Unit - Mitsubishi Electric -MR-CV User Manual

10.2

Selection example of wires

• To comply with the IEC/EN/UL/CSA standard for wiring, use the wires described in "MR-CV_ Instructions
and Cautions for Safe Use of AC Servos (IB(NA)-0300228)". To comply with other standards, use wires that
comply with each standard.
• Selection requirements for the wire size are as follows.
Construction requirements: Single wire set in midair
Wiring length: 50 m or less

Selection example of wires for converter unit

The following shows the wires used for wiring. Use the wires given in this section or equivalent wires. The following figure is a
schematic diagram that shows the wires used for wiring.
(1) Main circuit power supply lead
Power supply
MR-CV_
L1
L2
L3
L11
L21
(2) Control circuit power supply lead
10 OPTIONS AND PERIPHERAL EQUIPMENT
10.2 Selection example of wires
10
89