Chapter 2 Installation - Mitsubishi Electric -MR-CV User Manual

2
INSTALLATION
Precautions
• Install the converter unit on incombustible material. Installing them either directly on or near combustibles may lead to
smoke or a fire. In addition, the converter unit must be installed in a metal cabinet.
• Provide an adequate protection to prevent the following matter from entering the converter unit: conductive matter such as
screws and metal fragments, and combustible matter such as oil.
• The converter unit may become hot. Take safety measures such as providing covers.
• Do not stack in excess of the specified number of product packages.
• Do not hold the front cover, cables, or connectors when carrying the converter unit. Doing so may cause the converter unit
to drop.
• Use the eyebolts of the converter unit for transportation only. Do not use them to transport the converter unit when it is
mounted on a machine.
• Do not overtighten the eyebolts of the converter unit. Tightening too hard may damage the tap.
• To prevent a malfunction, do not drop the converter unit or subject it to impact.
• When installing the converter unit, follow the user's manual and install the unit in a place that can support its weight.
• Do not get on the equipment or put a heavy load on it.
• Do not install or operate a converter unit that is missing parts or is damaged.
• To prevent a malfunction, do not block the intake and exhaust areas of the converter unit.
• Do not subject connectors to impacts. Doing so may cause a connection failure, malfunction, or other failures.
• Use the product within the specified environment. For details on the environment, refer to the following.
Page 8 Standard specifications
• To prevent a fire or injury from occurring in the event of an earthquake or other natural disaster, securely install, mount, and
wire the servo amplifier as stated in the user's manual.
• When the product has been stored for an extended period of time, contact your local sales office.
• When handling the converter unit, be careful with the edges of the converter unit.
• Fumigants that are used to disinfect and protect wooden packaging from insects contain halogens (such as fluorine,
chlorine, bromine, and iodine) cause damage if they enter our products. Please take necessary precautions to ensure that
any residual materials from fumigants do not enter our products, or perform disinfection and pest control using a method
other than fumigation, such as heat treatment. Perform disinfection and pest control on the wooden packaging materials
before packing the products.
• Provide an external emergency stop circuit to stop the operation and shut-off the power immediately.
• For equipment in which the moving part of the machine may collide against the load side, install a limit switch or stopper to
the end of the moving part.
• Do not use the servo amplifier in environments where it is exposed to strong magnetic fields, electric fields, or radiation.
Doing so may cause operation failure or malfunction.
2
2 INSTALLATION
11