Gate-Control Function; Independent Swing - Lennox VRF VEWCL1E Instruction Manual

7.7 Gate-control Function

When there is Gate-control System, user can insert a card to turn on the unit or
pull off a card to turn off the unit. When the card is re-inserted, the unit will recover the
operation as state in memory. When the card is pulled off (or improperly inserted),
" " icon will show, neither remote control nor operation of wired controller will be
effective and icon "
Note: This model cannot be connected with gate control system on its own
because it cannot detect gate control signal directly. To realize gate control display
and gate control function, it has to be used with wired controller that includes gate
control signal detecting function (used as master and salve wired controller).

7.8 Independent Swing*

In the homepage, press "
"function", and then press and hold "
of independent swing function, as shown below.
After activating the option of independent swing function, select "Independent
swing" in the functional page to enter into the setting page, as shown below.
" will be flickering.
" button to enter into menu page and then select
" buttons for 5 seconds can activate the option
Wired Controller VEWCL1E
49