Instructions To General Operation; Setting Of Timer - Lennox VRF VEWCL1E Instruction Manual

prevent condensation or frost of whole unit, it will stop intaking fresh air and only
conduct air discharge.
Auto mode: auto mode is a kind of fresh wind mode which is based on the Fresh
Air Inlet Temp, Indoor Ambient Temp as well as related Fresh Air Inlet Humidity.

9 Instructions to General Operation

9.1 Setting of Timer

In the homepage, press "
"Timer" to enter into the timer page, as shown below. The left side of timer displays
" " means this timer function is turned on, when it displays " " means the timer
function is turned off.
In the timer page, press "
"Timer 1" or "Timer 2" or "Timer 3" or "Timer 4" to enter into the setting page of
specific timer period, as shown below (take timer 1 as example).
In order to ensure the precision of time, before setting the timer, please check if
" button to enter into the menu page, and then select
" or " " button to switch the options, select
57
Wired Controller VEWCL1E