Lennox VRF VEWCL1E Instruction Manual page 25

selected indoor unit will beep until quitting the viewing page or switching to the next
indoor unit, the selected indoor unit stops beeping.
(2) View All IDU Project No.
In project No. viewing page, select "View All IDU Project No." to enter into the
page, as shown below, user can turn on or turn off the function of viewing all the IDU
project No.
After activating the function of viewing all the IDU project No., all the IDU, wired
controller (wired controller will display the IDU project No. circularly in every 3
seconds, and will display according to the project No. from small to large) in the
network will display its project No.
After activating the function of viewing all IDU project No., user can enter into this
page to turn off the function, or press "
of the network to cancel the display of all IDU project No.
(3) Parameter View
In the project view page, select "Parameter View" to enter into the page, as
Wired Controller VEWCL1E
" button in anyone of the wired controller
21