Instructions For Status Column - Lennox VRF VEWCL1E Instruction Manual

Wired Controller VEWCL1E

5 Instructions for Status Column

Table 5.1 Instruction for Status Column of AC
Icon Name Instruction
Display when the current indoor unit connected by the wired
Master controller is master indoor unit (the icon will not be displayed
when the wired controller connects to heat recovery unit)
Display when one wired controller controls multiple indoor units at
Group control
the same time
Slave wired It means the current wired controller is a slave wired controller
controller (address of wired controller is 02)
Shielding It means shielding status
Card pulling The gate control card is pulled out
Lock Lock status
Invalid operation Display when the operation is invalid
Error Display when error occurs
Memory status (when the unit is re-energized after power failure,
Memory
the indoor unit will resume to the setting status)
Defrost Defrosting status of outdoor unit
7