Setting Of Modes - Lennox VRF VEWCL1E Instruction Manual

Wired Controller VEWCL1E

8.2 Setting of Modes

Under ON status, each time pressing the "
will be switched as the following order circularly:
Cool -> Dry -> Fan -> Heat -> Cool
Notes: instructions for mode switch:
a) For the Heat Recovery unit, anyone of IDU can switch mode arbitrarily;
b) For oher units, the system mode will be subject to the mode of master
Fig. 8.1 Unit-ON Interface
Fig. 8.2 Unit-OFF Interface
52
" button in the homepage, the mode