Setting Of Functions - Lennox VRF VEWCL1E Instruction Manual

Wired Controller VEWCL1E
（2）Left and right swing function*:
Left and right swing function has two modes: simple swing and fixed frame swing.
Select "L&R Swing Position" in the functional page,and then press "
between simple swing mode and fixed frame swing mode.
Under ON status, press "
setting, press " " or " " button to switch to the setting of left and right swing:
1）When it is set as simple swing, press "
off the left and right swing, after finishing the setting, press "
setting.
2）When it is set as fixed frame swing, press "
swing mode according to the order of the following figure circularly, after finishing
setting, press "

7.6 Setting of Functions

Under menu page,select "Func" to enter into functional setting page, as shown
below.
Switch the option via "
off corresponding function. If the left of certain function displays " ", it means the
" button can save the setting.
" or "
" button in the homepage to enter into swing
" or "
" or "
" button, press "
40
" can switch
" button can turn on or turn
" button to save the
" button can switch the
" button can turn on or turn