Setting Of Functions - Lennox VRF VEWCL1E Instruction Manual

will be started up or stay at the standby status according to the on/off of
indoor unit under the CAN network.
② Auto control mode can be started up only when the air box is existed.

8.6 Setting of Functions

Under menu page, select "Func" to enter into functional setting page, as shown
below.
Switch the option via "
off corresponding function. If the left of certain function displays " ", it means the
function is turned on, if it displays " ", it means the function is turned off. Press " " or
" " button can switch to the previous or the next page, press "
setting and return to the previous page.
Notes:
① If the function under certain circomstances is invalid, it will display gray, press
" " or "
② After lock function is activated, it will automatically return to homepage, and
any button operation in homepage become invalid, only operate according to
the prompts can unlock the function.
Introduction to Functions:
Humidification*: this function can set the ON and OFF of humidity function of IDU.
Free Cooling: after this function is activated, when the outdoor temperature is
" or "
" button will skip over this function.
" button, press "
55
Wired Controller VEWCL1E
" button can turn on or turn
" can save the