Operationsset Time And Date; Lock Function; Louver Swing Function; Units With Up/Down And Left/Right Swing Functions Only - Lennox M0STAT120N-1 Installation And User Information

Operations
Set Time and Date
1. Press the Timer button for a minimum
of two seconds. The Timer display
flashes.
2. Press the Up/Down buttons to set the date.
The selected date flashes.
3. Press the Confirm button to set the
date.
4. Press the Up/Down buttons to set the time.
Press either button repeatedly to adjust
the time in one minute intervals or press
and hold until the current time is reach.
5. Press the Confirm button to set the
time.
NOTE: Press both the Timer and Day
Off/Delay buttons to alternate the
clock time display to either 12 hour
or 24 hour format.

Lock Function

1. Press both the Function and Swing
buttons at the same time for three
seconds to activate the Lock function.
This also disables all button functions on
the controller. When the Lock function
is activated, a lock icon displays on the
controller's screen.
2. Press both the Function and Swing
buttons for three seconds to deactivate
the Lock function.

Louver Swing Function

Units with Up/Down and Left/Right
Swing Functions Only
1. Press the Swing button to start the
up and down swing function. Press it
again to stop.
2. Press and hold the Swing button for
two seconds to start the left and right
swing function. Press and hold again
for three seconds to stop.
Units with Up/Down Swing Functions
1. Press the Swing button to start the
up and down swing function. Press it
again to stop.
NOTE: Each time the Swing button is
pressed, the louver swings an
angle of six degrees. Continue to
press the button until the desired
direction is reached.
2. Press the Swing button for two seconds
to activate auto swing. The horizontal
swing icon displays on the controller's
display.
11
Only