Setting Of Modes - Lennox VRF VEWCL1E Instruction Manual

Wired Controller VEWCL1E

7.2 Setting of Modes

Under ON status, each time pressing the "
will be switched as the following order circularly:
Auto-> Cool -> Dry -> Fan -> Heat ->Floor ->3D Heat -> Space -> Auto
Note:
① The supporting modes differs due to different models, the wired controller will
automatically select the setting range of mode according to model of IDU;
② Only master IDU can set the Auto mode (t not applicable to heat recovery
units);
Fig. 7.1 Unit-ON interface
Fig. 7.2 Unit-OFF interface
36
" button in the homepage, the mode