6.5 Editing the Filter Rules
Click the Filter Rule index button to enter the Filter Rule setup
page for each filter. The following explains each configurable item
in detail.
Comments: Enter filter set comments/description. Maximum
length is 14 characters.
Check to enable the Filter Rule: Enables the filter rule.
Pass or Block: Specifies the action to be taken when packets
match the rule.
Block Immediately: Packets matching the rule will be
dropped immediately.
Pass Immediately: Packets matching the rule will be passed
immediately.
Block If No Further Match: A packet matching the rule, and
that does not match further rules, will be dropped.
Pass If No Further Match: A packet matching the rule, and
that does not match further rules, will be passed through.
Firewall
6-6