Draytek Vigor2500V Manual page 8

1.3 Front Panel LEDs and Rear Panel Interfaces
1.3.1 Vigor2500V
LED Status
ACT (Activity) blinking The router is powered on and running properly.
E-mail
blinking
ADSL on
green
VoIP
orange
on
Firewall
blinking When encountering DoS attacks.
green
LAN
orange
(P1, P2, P3, P4)
blinking Ethernet packets are transmitting.
Interface Description
PWR Connect the included power adapter to the power outlet.
Line Connect to the analog phone line for PSTN life line.
Phone Connect to the analog phone for VoIP communication.
ADSL Connect the ADSL line to access the Internet.
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking), press the hole and keep for more than 5 seconds. When the ACT
Factory Reset
LED begins to blink rapidly, release the button. Then the router will restart
with the factory default configuration.
P1, P2, P3, P4 Connect to the local network devices.
Preamble of Vigor2500V series
Explanation
When detecting one or more user-defined e-mails existing on
mail server.
The ADSL line is showtime.
Solid light when the handset of phone is picked up (off hooked).
Blinking per 0.3 second when phone call is via ISDN loop
through.
Blinking per 2 seconds when phone is connected through VoIP.
Solid light when phone call is via PSTN life line.
The firewall function is active.
A normal 100Mbps connection is through its corresponding port.
A normal 10Mbps connection is through its corresponding port.
7