Draytek Vigor2500V Manual page 162

21.2 Firmware Upgrade (TFTP Server)
Before upgrading your router firmware, you need to install the Router Tools
from our bundled CD. The Firmware Upgrade Utility is included in the tools.
The following steps will guide you to upgrade firmware. In the following
procedure, we use an example to explain the firmware upgrade. Note that this
example is running over Windows OS (Operating System).
1. Download the latest firmware from DrayTek's web site or FTP site. The
DrayTek web site is
FTP site is
2. Go to Start > Programs > Router Tools > Router Firmware Upgrade
Utility to launch the Firmware Upgrade Utility.
Click the Browse button to locate the new firmware file. The program will look
for any Vigor routers on your LAN and display them by IP address. Select the
'IP address' of the appropriate router to upgrade, then press Upgrade. Enter
the router's password when asked (or press OK if there is no password). The
upgrade action will start and the status will be shown on the progress
bar. Once the upgrade operation has completed, wait approximately 30
seconds and the router will be ready (ACT light in the front panel of your Vigor
router will resume flashing normally).
Reboot System / Firmware Upgrade
www.draytek.com
ftp.draytek.com
(or local DrayTek's web site) and
21-2