Draytek Vigor2500V Manual page 170

Trouble-Shooting of Vigor2500V/Vi series
ADSL VoIP Routers
Firstly, Check your Hardware Installation!
Before starting to configure the router, you have to connect your devices correctly.
1. Connect the ADSL interface to the external splitter with a RJ-11 cable.
2. Connect one port of 4-port switch to your computer with a RJ-45 cable.
3. Connect the attached power adapter to the power port.
4. Check the ACT, ADSL and LAN LEDs to assure network connections.
(Regarding detailed LED status explanation please refer to section 1.3)
Connection scenario is shown as below:
The splitter or microfilter is the optional accessories.
1
TroubleShooting of Vigor2500V series