Draytek Vigor2500V Manual page 151

Syslog Access Setup
1. Check the Enable box to activate the syslog service.
2. Server IP Address: Specify an IP address to which all syslog
messages will be sent.
3. Destination Port: Specify a UDP port number to which the syslog
server is listening. The default value is 514.
Mail Alert Setup
1. Check the Enable box to activate the mail alert service.
2. SMTP Server (IP): Specify an IP address of the SMTP server which
can send mails from your Vigor router to the recipients' mailboxes
directly.
3. Mail To: Specify an e-mail address of the recipient's mailbox to which
all syslog messages will be sent.
SysLog/Mail Alert
18-2 2
The recipient could be an