Refresh: To obtain the latest information, click here to reload the
page.
Broadband Access Mode/Status: Display the broadband access
mode and status. If the broadband connection is active, it will show
PPPoE, PPTP, Static IP, or DHCP Client depending on which
access mode is enabled. If the connection is idle, it will show "---".
WAN IP Address: The WAN IP address for the active connection.
Dial PPPoE or PPTP: Click it to force the router to establish a
PPPoE or PPTP connection.
Drop PPPoE or PPTP: Click it to force the router to disconnect the
current active PPPoE or PPTP connection.
22.3 If your router is Vigor2500Vi:
Please find the ISDN portion:
ISDN Link Status: If the link is active, this field will show UP.
Otherwise, it shows DOWN.
Dial ISDN: Clicking here causes the router to dial to the preset ISP.
Click ISDN > Dial to a Single ISP to configure dial-up settings.
Activity: Displays the connection name for each B channel. If the B
Diagnostics
22-2