Draytek Vigor2500V Manual page 36

Internet Access
3.2.2 For MPoA (RFC 1483/2684) Users
Enter your allocated WAN IP address (or enabling DHCP client to get IP from
ISP) and DSL parameters according to the information provided by your ISP.
RIP Protocol
Routing Information Protocol is abbreviated as RIP RFC1058 –specifying
how routers exchange routing tables information.
Enable RIP
Check this checkbox. The router periodically exchanges
entire routing tables.
If you have multiple public IPs, they are assigned from the WAN interface.
Click WAN IP Alias, the following windows will be pop-up. You can assign
additional IPs on the page, and click OK.
3-3