Draytek Vigor2500V Manual page 11

2. Hardware Installation of Your Vigor2500V/Vi Router
2.1 Hardware Installation
Before starting to configure the router, you have to connect your devices correctly.
1. Connect the ADSL interface to the external splitter with a RJ-11 cable.
2. Connect one port of 4-port switch to your computer with a RJ-45 cable.
3. Connect the attached power adapter to the power port.
4. Check the ACT, ADSL and LAN LEDs to assure network connections.
(Regarding detailed LED status explanation please refer to section 1.3)
Connection scenario is shown as below:
The splitter or microfilter is the optional accessories.
There are some variant connection in Annex A and Annex B countries. Followings are more
reference for you:
Annex A: Annex B:
Preamble of Vigor2500V series
10