Draytek Vigor2500V Manual page 140

15.1 Introduction
Some applications require that the router (only for ISDN model) could be
remotely activated, or dial up to the ISP using the ISDN interface. For
instance, if you want to access the Internet via ISDN from home, usually the
dialup connection is idle when you are not at home. It may be that, while
working in the office, you want to get some files from home. Hence, the
Vigor routers provide this function that allows you to make a phone call to the
router and then ask it to dial up to the ISP. Accordingly, you can access your
home network to retrieve the files. Of course, you should have a fixed IP
address and expose some internal network resources to outside world, for
example FTP, WWW and so on.
In the following, we explain how to setup call control and PPP/MP in
Advanced Setup. You can use the following setup link on the Setup Main
Menu to configure it. ISDN > Call Control and PPP/MP Setup.
The Call Control and PPP/MP are only available on the ISDN interface of
Vigor2500Vi series. This chapter is not applied to Vigor2500V which does
not have ISDN interface.
Call Control and
PPP/MP Setup
15-1
Vigor2500V series
Chapter 15