to make sure if the time server is working properly. If the time
server is located at the Internet, you should also make sure the
router
has
Internet
Maintenance and then click Time Setup.
2. Click Use Internet Time Client, choose Time Protocol as NTP,
specify an IP address of time server for the Server IP Address,
choose an adequate time zone in the Time Zone and in turn
select an updated time interval in Automatically Update Interval.
The following screen shows an example.
3. Click OK button, wait for few seconds, and then the time client will
get time base from the specified time server.
Time Setup
access
capability.
19-3
Enter
System