Draytek Vigor2500V Manual page 116

VoIP
12.2.2 SIP Related Function Setup
Once you are registered with a SIP Server (e.g. DrayTEL) set your SIP
username and password in the appropriate boxes (detailed explanation below).
In the Registrar box enter the entire domain of the SIP server – everything after
the @ sign of your SIP address. Click OK and your router will log onto the SIP
server. In the "VoIP Call Status" you will find an "R" indicating you have
registered with your SIP server.
SIP Port: The port number used to send/receive SIP message for building a
session. The default value is 5060 and this must match with the peer Registrar
when making VoIP calls.
Registrar: Enter the domain name (or IP address) of your registered SIP
Registrar server.
Use Registrar: With the Registrar domain entered above, check this box to let
the Vigor2500V use the SIP Registrar.
Name: Enter your SIP username (the first part of your SIP address before the @
sign)
Password: Your SIP address as provided when you registered with a SIP
service.
12-8