Start IP Address: Set the starting IP address of the IP address pool.
IP Pool Counts: Set the number of IP addresses in the pool.
MAC Address: Type the specific MAC Address that could be added,
removed or edited on the access list.
ADD: To add a MAC address on the list.
Remove: To delete the selected MAC address on the list.
Edit: To edit the selected MAC address on the list.
Cancel: Give up the MAC address access control setup.
Close: Close this window.
Clear All: Clean all entries of MAC addresses on the list.
OK: Save the access control list.
RIP Protocol Control:
Disable: Disable the exchange of RIP packets on LAN interface.
1st Subnet: Set the 1st subnet to exchange RIP packets with neighbor
LAN TCP/IP and DHCP
4-3