When the icon text is GREEN, the Virtual TA client is connected to the Virtual
TA server and you can launch your CAPI-based software to use the client to
access the router. Read your software user guide for detailed configuration.
If the icon text is RED, it means the client lost the connection with the server.
Check the physical Ethernet connection.
14.3 Configure a Virtual TA Client/ Server
The Virtual TA application is a client/server model. You must set it up on both
ends to operate properly your Virtual TA application.
By default, the Virtual TA server is enabled and the Username/Password fields are
empty. Any Virtual TA client may login to the server. Once a single
Username/Password field has been filled, the Virtual TA server will only allow
clients with a valid Username/Password to login.
Virtual TA Setup is shown below.
Virtual TA Server
Enable: Check it to activate the server.
Virtual TA (Remote CAPI)
14-3
The web configuration of