Draytek Vigor2500V Manual page 134

As depicted in the following application chart, the Virtual TA client can make an
outgoing call or accept an incoming call to/from a peer FAX machine or ISDN TA
etc. Use the following setup link on the Setup Main Menu to configure the Virtual
TA facility.
ISDN > Virtual TA (Remote CAPI)
14.2 Install a Virtual TA Client
1. Insert the CD-ROM supplied with your Vigor router, or directly double-click
the installer file. Vsetup95.exe is for Windows 95 OSR2.1 or higher,
Vsetup98.exe is for Windows 98, 98SE and Me, and Vsetup2k.exe is for
Windows 2000.
2. Follow on-screen instructions of the installer. The last step requires you
to restart your computer. Click OK to restart.
3. After the computer restarts, you will see a VT icon on the taskbar (usually
in the bottom-right of the screen, near the clock) as shown below.
Virtual TA (Remote CAPI)
14-2