Hartridge CRi-PC Operating And Servicing Manual page 93

Common rail injector test stand
Hide thumbs Also See for CRi-PC:
Table of Contents

Advertisement

HARTRIDGE LIMITED
Side panel
The procedure for removing the side access panel is described in section 2.6. The side panel
allows access to the magnetic debris filter in the main tank, the 'clean' tank and allows access
for filling with test fluid.
Lower front panel
Refer to Figure 5.3
The lower front panel allows access to the clamping cylinder, the pneumatic solenoids, the
tank thermostat and the cooling water solenoids.
Loosen the panel screws arrowed 'A' and remove the panel screws arrowed 'B'.
The panel lifts off, leave screws 'A' in position as these will help to locate the panel when it is
replaced.
HL037 (EN), Issue 13, AT714, 05/14
THIS IS AN UNCONTROLLED DOCUMENT downloaded by Lukas Matuska on 16 Feb 2016
Any technical intervention requires certified Hartridge training. Contact Hartridge Ltd for details.
Figure 5.2 Rear Panel
A
B
B
B
A
CRi-PC Operating and Servicing Manual
B
B
A
B
91

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Hartridge CRi-PC

Table of Contents