Hartridge CRi-PC Operating And Servicing Manual page 92

CRi-PC Operating and Servicing Manual
Figure 5.1 Electrical Enclosure Access
Rear panel
Refer to Figure 5.2
This panel allows access to the CR Pump and the test fluid tanks.
Release the five panel securing nuts (arrowed). The panel may then be lifted and removed.
90
THIS IS AN UNCONTROLLED DOCUMENT downloaded by Lukas Matuska on 16 Feb 2016
Any technical intervention requires certified Hartridge training. Contact Hartridge Ltd for details.
2
2
2
WARNING!
HIGH FLUID PRESSURES MAY EXIST WITHIN THE
TEST STAND.
DO NOT REMOVE ACCESS PANELS UNTIL THE
MOTOR HAS BEEN STOPPED, RAIL PRESSURE
HAS DECAYED TO A LOW LEVEL AND THE
MACHINE SWITCHED OFF.
FLUID SPRAYS, ESPECIALLY FROM LEAKING
HIGH PRESSURE PIPES AND SEALS, WILL CAUSE
HIGH PRESSURE INJECTION THROUGH THE SKIN
WHICH CAN RESULT IN FATAL INJURY.
HARTRIDGE LIMITED
1
HL037 (EN), Issue 13, AT714, 05/14